Collection of samples from a conveyor transfer duct

The device for taking representative samples of bulk materials (powders, dusts, granulates and aggregates) from the transfer channels is an element of the WOLFF GROUP offer. The offered samplers can be mounted on ducts and gutters where the product is transported by gravity. Solutions provided by our company are characterized by solid workmanship, precision of operation and reliability.

Donat Czapski Grupa WOLFF zdjecie
DONAT CZAPSKI - I am at your disposal

We will answer questions about: offer, technical specification, delivery, assembly.
  • Collection of representative samples of loose materials (powders, dusts, granulates, aggregates) from ducts and conveyor transfers where the product is transported gravitationally
  • Various constructions of sampling devices are adjusted for requirements of the following industries: food, pharmaceutical, cosmetic (design as per GMP standards), cement, chemical, power (conformity with the following standard: CEN/TS 14778-1:2005, ISO 13909-1:2001, ISO 13909-2:2001, ISO 1988:1975)
  • Possibility of operation in an explosion risk zone: 22, 21, 20 inside the sampling device, 22 outside the sampling device

Design in conformity with the ATEX95 directive:

  • Possibility to apply in explosion risk zones (20, 21, 22 inside the device and 22 outside the device)

Sampling biomass:

  • CEN/TS 14778-1:2005 – Solid fuels. Sampling. Methods of sampling

Taking samples of coal:

  • ISO 13909-1:2001 – Hard coal and coke – Mechanical sampling – Part 1: General introduction
  • ISO 13909-2:2001 – Hard coal and coke – Mechanical sampling – Part 2: Coal – Sampling from moving streams
  • ISO 1988:1975 – Hard coal – Sampling

Design in conformity with GMP standards

  • Selection of a proper solution
  • Execution of necessary structures (if necessary)
  • Installation, commissioning, service

  Designing installations for bulk materials

Depending on the investor’s needs, we are able to provide a single device, as well as design and then build a complete installation for bulk materials. In addition, we design and production dedusting and central vacuum systems (including those for explosive dust).

  Explosion safety

Due to over 25 years of experience in the field of explosion safety, if installation will process flammable or explosive dusts, we are able to make appropriate systems to protect against the effects of an explosion and studies required by law (including explosion risk assessment, determining of explosion hazard zones, explosion protection document).

Do you have any questions?

Donat Czapski Grupa WOLFF zdjecie
DONAT CZAPSKI - I am at your disposal

We will answer questions about: offer, technical specification, delivery, assembly.

or send your inquiry